Brushed Cotton Fleece
Brushed Cotton Fleece. Price is quoted per meter.
Description: Cotton Fleece has many uses due to its softness, absorbency and breathability. It is a smooth knit on one side and has a fluffy, brushed finish on the other side.
Product uses: Diaper uses include prefolds, inserts, boosters, wipes and fitteds. It can also be used for clothing, bedding, blankets etc.
Origin: Locally manufactured (South Africa) from locally grown cotton
Content: 100% cotton with a brushed finish
Approx. Shrinkage: +/-5%
Fabric Width: 100cm tubular, approximately 200cm open width
Fabric Weight: 240gsm
Sewing Recommendations: Thin ballpoint needle, cotton or polyester thread
Quantity Information: Quantity = number of continuous meters. All cut lengths are sent as continuous meters and bulk cuts are sent in continuous meters up to 10 meter lengths.
Care Instructions: Pre-wash for shrinkage if needed, warm wash up to 60 deg C, tumble dry safe.
Warranty Information: All fabrics (especially natural fiber fabrics) may have small holes, marks or flaws in the fabric. These are out of our control, however we send extra meterage to make up for the defect. Fabric Rolls may contain seams where two ends of the fabric are sewn or taped together or marks which can be easily washed away. We always give extra meterage for seam & damage allowances. Light Colored fabrics may have some dirty marks, especially along the selvages due to transportation. These should wash right up and not affect the function of your fabric.
Specs Disclaimer: This information is obtained by our suppliers. It is published for your general information only and does not represent a warranty or guarantee by Fabric Matters. Fabric Matters assumes no responsibility as to the accuracy or the suitability of the information or product for purchaser’s intended uses or application. The purchaser should conduct its own tests to determine the suitability of the material for their particular application. Product uses as mentioned above are only suggestions/ideas and testing should be done by the purchaser. Samples may be purchased for this purpose.